Skip to Content

New to the Mac? Check out TUAW's Mac 101
AOL Tech

Kanex Mini DisplayPort Adapter will take your Mac mini to HDMI town

by Tim Stevens posted Oct 5th 2009 at 9:03AM

Kanex Mini DisplayPort Adapter will bring your Mac Mini to HDMI town
Your Mac mini cranks out its video via DisplayPort and audio via a mini Toslink. Chances are your home entertainment system doesn't like either of those. It will, however, like the Kanex Mini DisplayPort Adapter, which can turn a DisplayPort video signal into a 1080p signal over HDMI, and will even integrate either digital or analog audio into the mix. It's USB powered, so there's no need for a clunky power adapter, and while $70 isn't particularly cheap for a chubby cable ($50 for the USB analog audio model), it's about the cleanest way to get your Mini pumping tunes and vids through your system.

[Via The Unofficial Apple Weblog]

Tech-On! examines DiiVA's (slim) opportunities in an HDMI world

by Richard Lawler posted Sep 21st 2009 at 12:44PM

Like us, you may be wondering if anything can take on HDMI in the digital connector space. Tech-On! has gone a bit more in depth on China's new DiiVA standard to examine what it has going for it, and whether there is a way for it to survive in the marketplace. So far most of its support has come from Chinese manufacturers, but LG, Panasonic, Samsung and Sharp are all apparently part of the DiiVA promotion group, with compatible equipment expected to be on display at CES 2010. Mix in the defection of an executive from Silicon Image who worked on spreading HDMI to DiiVA backer Synerchip, and it seems like the spec -- based on CAT-6 cabling and offering enhanced networking functions -- might actually stand a chance.

NXG Technologies is first with HDMI 1.4 cables for the 3D HDTV you don't own yet

by Richard Lawler posted Aug 5th 2009 at 11:09AM


Cancel that next-day air shipment from Panasonic Japan, those in need of cables today that are compatible with the 4K and 3D displays of tomorrow can get NXG Technologies Black Pearl Series HDMI v1.4 cables. Not installing cables inside a wall or under a floor? You can probably wait for more reasonably priced (or not so reasonable, if that's what you prefer) alternatives. At around $44.95 for 1m up to $380 for a 20m cable, these available-to-dealers-only connectors promise (despite lacking certification, promised once testing is completed) to future proof custom home theater installations for beyond-1080p resolution, HDMI Ethernet Channel, Audio Return Channel and other HDMI 1.4-only features that should start rolling out in HDTVs, receivers and other equipment early next year.

HomePlug fires back with powerline IEEE P1901 Draft Standard adoption

by Steven Kim posted Jul 29th 2009 at 5:19PM

HomePlug Power Alliance logoHighly variable real-world performance aside, the lack of a well-defined standard for powerline networking isn't helping the technology take off; but sticking consumers between the warring G.hn and HomePlug AV factions doesn't help anybody. In the latest round of the fight, the IEEE P1901 reached Draft Standard acceptance, and -- wouldn't you know it -- the onus of coming up with compliance and interoperability testing for products will fall upon the HomePlug Powerline Alliance. Just to raise the stakes, the Draft Standard is aiming for backward compatibility with existing devices. Sounds like herding cats to us, but with finalization of the Standard slated for 2010, it looks like things are going to heat up in the coming months.

Panasonic delivering HDMI 1.4 cables in Japan next month: $42 for 1 meter

by Richard Lawler posted Jul 27th 2009 at 8:33PM


It's unlikely you have any HDMI 1.4 equipped 1080p 3D, or 4K/2K capable equipment laying around the house, but that hasn't stopped Panasonic from rolling out these high speed cables already, just announced in Japan. Expected to launch August 27, they range in length from 1m to 10m, and in price from ¥4,000 ($42) to ¥20,000 ($210.) Sure you could import them just to stunt on your Monster Cable owning friends, but somehow we suspect most will be waiting for these to hit Monoprice, Blue Jeans Cable and the like, oh, and for equipment that can actually take advantage of their extra capabilities.

[Via AV Watch]

3D, ARC and Ethernet capable HDMI 1.4 hardware announced, still a long way off

by Richard Lawler posted Jul 22nd 2009 at 8:37PM


The new HDMI 1.4 spec adds a host of new features (and, most likely, a lot of new ways to get scammed on cable purchases) but for those excitedly anticipating Audio Return Channel, HDMI Ethernet Channel and 3D over HDMI should know Silicon Image has announced its first line of chips supporting them. Destined for HDTVs, receivers, Blu-ray players and the like, the new port processor and transmitter have the extremely specific sample delivery date of "second half of 2009" so while we certainly don't expect to see any actual hardware until well into next year, keep an ear to the ground if you're considering an upgrade before then.

Ultra-clean custom install leaves us ashamed of our rat's nest

by Steven Kim posted Jul 18th 2009 at 8:36PM

Clean install
As impressive as some custom installs look from the front-end, CEPro has photos of the back-end of a "masterpiece" setup that simply must be seen. If you think moving a set-top box to a remote location is excessive, you'll want to munch on some Xanax before hitting the link, because your head might a-splode. Sure, the ultra-wealthy can get the job done by cutting a nice big check, but you've got to respect this kind of fanatical attention to detail that someone mustered to both plan out and install by hand. Considering that the system has more than a dozen Crestron panels for HVAC, lighting, AV, security, water features and a train set (ultra-rich, remember?), you might even say that the effort was necessary for getting things up and running and keeping them that way.

Blue Jeans Cable shows off 100-ft unamplified HDMI cable

by Steven Kim posted Jun 20th 2009 at 7:27AM

Blue Jeans Cable Series-1 HDMI cableNews releases about cable generally come in somewhere between "meh" and "pfft" on our interest-ometer, but this one we couldn't pass up. Blue Jeans Cable, the one-time victim of that cable company, has demoed real quality HDMI cables without the hype. Getting more than about 30-feet of HDMI cable to make good on its "just plug it in, and it works" promise has always been challenging, but Blue Jeans showed off a 100-foot stretch of its 23.5AWG HDMI cable carrying 1080p/60 material at InfoComm this week. No exotic lights, ferrite beads, cryogenic gimmickry or even speed rating here, just quality bulk Belden wire with Bonded-Pair technology that maintains a constant cable impedance and keeps all those bits flowing in synch. Sure, $266 for a 100-foot stretch (shorter lengths are available) of Blue Jeans' Series-1 HDMI cable isn't the cheapest, but you're paying for quality.

HDMI 1.4 officially detailed: Ethernet / Audio Return channels, 3D, 4K x 2K support

by Darren Murph posted May 28th 2009 at 11:21AM


We already heard that HDMI 1.4 was just around the bend, and now HDMI Licensing has come forward with all of the official details surrounding the specification. Unfortunately for AV enthusiasts, it seems as if we're taking two steps forward and three back, and we get this sinking feeling that HDMI 1.5 will be here before we know it. At any rate, the main additions to the format are an Ethernet channel, audio return channel, 3D over HDMI, 4K x 2K resolution support, a micro HDMI connector (around half the size of the existing HDMI Mini plug) and an automotive connection system. All fine and good, right? Sure, until you get to the part about having to choose between five different HDMI 1.4 cables, something that the suits at Monster just had to have a hand in. For a detailed look at what you'll need to study up on before buying your next HDMI cable, clinch your fists and hit the read link.

HDMI 1.4 brings internet sharing, dreadful tiers of quality

by Darren Murph posted May 14th 2009 at 9:43AM


Okay, so there's good news and bad news. Given that we just love to tease, we'll start you off with the positives. HDMI 1.4 was just revealed, bringing with it an HDMI Ethernet Channel (HEC) that enables data transfers of up to 100 Mbps between supported connected devices. Put simply, this could allow a "broadband-connected television using its HEC-enabled HDMI port to provide internet connection sharing with another HEC-enabled device such as a game console or DVR." Furthermore, the spec's Audio Return Channel (ARC) enables broadcast audio to be easily streamed back to an external amplifier, and the Automatic Content Enhancement (ACE) provides support for "future 3D video standards, increased resolution support (up to 4,096 x 2,160 pixels at up to 30Hz), and content recognition that promises to automatically optimize the TV's picture settings based on content type."

The bad news? HEC will only work with new HDMI 1.4 spec cables, and those will be graded into two separate levels of performance: low- and high-data rate. We needn't describe to you what kind of ball Monster Cable is going to have with that one, but even outside of that, we're baffled by the decision to add one more complexity to a cable that should seriously be doing everything in its power to not be overshadowed by DisplayPort. At any rate, we're told that Silicon Image is hoping to ship chip samples to manufacturers in Q2 2009, while HDMI 1.4-enabled products could arrive as early as next year. We aren't holding our breath, but we'll gladly eat crow if need be.

Latest mini-HDMI connectors get shown off in prototype form

by Donald Melanson posted May 8th 2009 at 3:39PM


Mini HDMI connectors aren't exactly anything new, but a number of companies have now produced some prototypes based on the latest Type D spec set for inclusion in the next HDMI standard, which they hope will be more suitable for cellphones, GPS systems, and other portable devices. One of those comes from Molex Inc (pictured above) and, like the others, is half the size of a regular HDMI connector (or about the same size as a micro-USB connector) but employs the same 19 pins as the standard HDMI design. That's joined by a similar connector from Yazaki Corp of Japan, as well as a connector designed specifically for automotive use by Japan Aviation Electronics Industry Ltd, which supposedly boasts improved reliability and durability. Still no promises as to when any of these specific prototypes will actually materialize, of course, but the first few mini connectors of some sort could start appearing as soon as the second half of this year.

Engadget HD giveaway: win a 3x1 HDMI switch and HDMI cables!

by Steven Kim posted Apr 30th 2009 at 10:02AM

Next Generation giveaway round 4
The recession antidote giveaways over at Engadget Classic have been a huge hit, and nothing could make us happier -- except a special set of giveaways just for HD readers, of course! We're sure AV gear is one of the first things to get trimmed from the household budget, but we want to make sure our readers aren't totally cut off. Luckily, the good folks at Next Generation Home Products sent us a raft of HD-centric goodies. This week we've reached in the gift bag and come up with two fistfuls of good, basic HDMI connectivity. We'll give away eight bundles: four will come with a 3x1 HDMI switch and a 4-m length of Next Generation's bulk Xtreme HDMI cable; the other four will consist of a 3x1 HDMI switch and a 3-m stretch of Xtreme HDMI cable. With the all the gadgets stacking up underneath your TV, you can never have enough HDMI cables or ports, so check the rules below and start commenting!

Special thanks to Next Generation Home Products for providing the gear!

The rules:
  • Leave a comment below. Any comment will do, but if you want to share your proposal for "fixing" the world economy, that'd be sweet too.
  • You may only enter this specific giveaway once.
    If you enter this giveaway more than once you'll be automatically disqualified, etc. (Yes, we have robots that thoroughly check to ensure fairness.)
  • If you enter more than once, only activate one comment. This is pretty self explanatory. Just be careful and you'll be fine.
  • Contest is open to anyone in the 50 States, 18 or older! Sorry, we don't make this rule (we hate excluding anyone), so be mad at our lawyers and contest laws if you have to be mad.
  • Winners will be chosen randomly. Four winners will each receive one (1) 3x1 HDMI switch and one (1) 4-m HDMI bulk Xtreme cable; approximate retail value is $246. Four winners will each receive one (1) 3x1 HDMI switch and one (1) 3-m HDMI Xtreme cable; approximate retail value is $290.
  • If you are chosen, you will be notified by email. Winners must respond within three days of the end of the contest. If you do not respond within that period, another winner will be chosen.
  • Entries can be submitted until Thursday, May 7th, 11:59PM ET. Good luck!
  • Full rules can be found here.

Engadget HD giveaway: win a 5x1 HDMI switch and long HDMI cables!

by Steven Kim posted Apr 22nd 2009 at 2:00PM

Next Generation Home Products giveaway - long HDMI cables
The recession antidote giveaways over at Engadget Classic have been a huge hit, and nothing could make us happier -- except a special set of giveaways just for HD readers, of course! We're sure AV gear is one of the first things to get trimmed from the household budget, but we want to make sure our readers aren't totally cut off. Luckily, the good folks at Next Generation Home Products sent us a raft of HD-centric goodies. This week, we're handing out stuff for those with gear separated by less than a stone's throw but more than an arm's length. We've got two bundles, each with a 5x1 HDMI switch with remote control and a HDMI EQ extender. To cover those long run lengths between components, one winner will get a 15-m HDMI cable, the other will get a 10-m length. Just in case you want to run that cable through your walls, we'll throw in two double HDMI wall plates in each bundle as well. Whether you've got a projector up in the ceiling or a noisy Xbox 360 in a closet, this giveaway is the one for you, so check the rules below and start commenting!

Special thanks to Next Generation Home Products for providing the gear!

The rules:
  • Leave a comment below. Any comment will do, but if you want to share your proposal for "fixing" the world economy, that'd be sweet too.
  • You may only enter this specific giveaway once.
    If you enter this giveaway more than once you'll be automatically disqualified, etc. (Yes, we have robots that thoroughly check to ensure fairness.)
  • If you enter more than once, only activate one comment. This is pretty self explanatory. Just be careful and you'll be fine.
  • Contest is open to anyone in the 50 States, 18 or older! Sorry, we don't make this rule (we hate excluding anyone), so be mad at our lawyers and contest laws if you have to be mad.
  • Winner will be chosen randomly. One winner will receive one (1) 5x1 HDMI switch, one (1) HDMI EQ extender, one (1) 1-m HDMI bulk cable, two (2) HDMI double wall plates and one (1) 15-m HDMI bulk cable; approximate retail value is $456. One winner will receive one (1) 5x1 HDMI switch, one (1) HDMI EQ extender, one (1) 1-m HDMI bulk cable, two (2) HDMI double wall plates and one (1) 10-m HDMI bulk cable; approximate retail value is $431.
  • If you are chosen, you will be notified by email. Winners must respond within three days of the end of the contest. If you do not respond within that period, another winner will be chosen.
  • Entries can be submitted until Wednesday, April 29th, 11:59PM ET. Good luck!
  • Full rules can be found here.

R2E cable adds eSATA transfer abilities to RED camera

by Darren Murph posted Apr 15th 2009 at 7:01PM


With NAB just about to get started in Las Vegas, CoolCameraGear is getting out ahead of the crowd with a newfangled adapter sure to please those who find themselves offloading gobs of RED footage. The R2E LEMO to eSATA cable essentially takes the burden away from your FireWire 800, FireWire 400 or USB 2.0 bus by enabling bits and bytes to flow over eSATA. RED camera users simply plug in their RED-Drive or RED-RAM using the original power adapter, then plug the LEMO end of the R2E cable into the drive and the other end into a standard eSATA port. Boom. Just like that, RED owners have instant access to eSATA transfers. For those unaware, eSATA support on camcorder is still a rarity, though the benefits are obvious for pros shuffling through multiple takes. Interested consumers can check this one out when the CoolCameraGear website goes live on April 20th for $230.
R2E cable adds eSATA transfer abilities to RED camera

Atlona teams with Wisair for wireless USB to HDMI adapter

by Darren Murph posted Apr 15th 2009 at 6:06PM


Wait a second -- isn't wireless USB, um, deceased? Regardless of what pundits and the industry at large have said (via words, actions, or otherwise), Wisair is absolutely refusing to give up the dream. To that end, the firm has teamed with peripheral mainstay Atlona in order to develop and produce a wireless USB to HDMI adapter. Much like the wired AT-HDPiX, the May-bound AT-HDAiR enables users to connect any USB-enabled computer to any HDTV or projector via VGA or HDMI. The difference? This one works sans extra cabling. The range here is 30 feet, though you can only expect footage to stream through at up to 720p (or 1,440 x 1,200). At least the price tag is just $199, which sure beats some of the obviously more capable options with WHDI chips within.




AOL News

Other Weblogs Inc. Network blogs you might be interested in:

Joystiq
Download Squad
The Unofficial Apple Weblog (TUAW)
BloggingStocks
Joystiq Xbox
Autoblog
Big Download
Fanhouse NFL Blog